Zoom

PILZ PSSu H FS2 SN SD

Write a review
Rs. 0.00

Technical Data
Electrical Data
Purpose of U1Module supply
Supply voltage (V)24 V
Type of supply voltage U1DC
Power consumption DC17 W
Purpose of U2Periphery supply
Supply voltage 2 (V)24 V
Type of supply voltage U2DC
Tolerance of U2-30 %/+25 %
Pot. isolation UINT1 to U2P_UINT1_5V_U_2_POT_TRENN_2000 V
Potential isolation U1 to U2P_U_1_U_2_POT_TRENN_2000 V
Purpose of UINT1int. system voltage
Type of UINT1DC
Tolerance of UINT1-2 %/+3 %
Max. curr. contin. oper. UINT12 A
Bridge U-interrupt UINT1 stan.EN 61131-2
UINT1 short circuit proofYes
Programming
IEC 61131 programmingNo
Multi programmingNo
Non-volatile variablesNo
CPU
Time deviation+/- 10s/day
RAM256 MB
Removable Storage Media
Plug-in memorySD card
SafetyNET p Interface
Connector type Safetynet i/fRJ45
Safetynet transmission rate100 MBit/s
Setting SafetyNet trans. rateAutomatic
SafetyNET p cycle time2 ... 60 000 ms
Environmental Data
Climatic suitability to ...
  • EN 60068-2-30
  • EN 60068-2-2
  • EN 60068-2-1
  • EN 60068-2-78
  • EN 60068-2-14
Ambient temperature0 - 60 Ā°C
Climatic suitability standardEN 60068-2-78
Humidity rating93 % r. h. at 40 Ā°C
Condensation permitted?Not permitted
Perm. operating height ASL2000 m
EMC to standard ...
  • EN 61000-6-2
  • EN 61000-6-4
  • EN 61131-2 (Zone B)
Vibration to standard ...EN 60068-2-6
Acc. shock to standard1150 m/sĀ²
Acc. shock to standard2
Clearance & creepage dist. toEN 61131-2
Overvoltage categoryII
Pollution degree clear. & creep.2
Protection type, mounting
Protection type, housing
Mechanical Data
Housing material lower sectionPC
Connection terminalSpring-loaded terminal, Screw terminal
Terminal stylePlug-in
Flex. cond. c/s AWG info24 - 12 AWG
Height dimension125.6 mm
Width dimension130 mm
Depth dimension83.7 mm
Net weight350 g
Gross weight390 g

Out of stock
Add compare Delete compare Add wishlist Delete wishlist

May 13 - May 17

Hurry Up! Only 1000 Left in Stock!

SUA00002839