Nexaweld

Gouging is a super heavy coated electrode specially designed for chamfering and gauging various metals without the need of supplementary gas, air, oxygen or other special torches.

50 In stock

Crack free deposits with higher strength. Ideal for contaminated surfaces Highly ductile It gives radiographic weld bead. Excellent impact resistance.

50 In stock

Medium rutile coated mild steel electrode designed for welding of unalloyed structural steels in all positions including vertical down. The electrode gives smooth radiographic quality weld with low spatter and less smoke. Slag is self detachable and re-striking is excellent.

50 In stock

It is a medium coated rutile type electrode for all position welding. The electrode is characterized by smooth and stable arc, low spatter, easy slag removal and fine rippled bead. Weld deposit good chemical and mechanical properties with radiography quality

50 In stock

It is a special purpose electrode specially designed for welding hot-dip galvanizing baths. The weld metal is highly resistant to molten zinc corrosion. Electrode is further characterized by soft arc, easily detachable slag and low spatter.

50 In stock

Nexa-GP is a rutile coated general purpose electrode for welding in all positions. It has a low spatter & smoke. The initial strike & restrike is excellent. The slag is easily detached from fillet and butt welds. In most cases it is self-lifting. The weld...

50 In stock

It is suitable for all position capability. Weld deposit good chemical and mechanical properties with X-Ray quality,

50 In stock

A thin coated rutile type general purpose electrode, it has a stable arc. Easy slag removal and finely rippled bead. Gives excellent welding on rusted sheets also.

50 In stock

Cut is a medium coated electrode specially designed for faster and smoother cutting, piercing of all type of steels including stainless steel, austenitic manganese steel, cast iron, non ferrous metal in all position. No special skills, supplementary equipment or oxygen tanks are required. It leaves...

50 In stock

The electrode gives soft stable arc on low currents. Deposits are smooth, tough and has excellent resistance to scaling, corrosion resistance at normal as well as elevated temperature. Also possesses good thermal cycles and shock resistance.

40 In stock

For surfacing roughening of sugar rolls increase surface areas of the rollers and therefore crushing efficiency, reduces POL % from bagasse, improve roller life etc.

12 In stock

An extra low carbon, all position electrodes. Gives stable arc, low spatter, smooth weld profile, easily removable slag. The weld deposit is of radiographic quality and withstand temp. upto 1200°C.

30 In stock

Self-releasing slag with little or no need for weld dressing or fettling negligible spatter. High quality weld deposit with defect free radiographic performance in multi pass welds. Extra low carbon content. Suitable to resist heat corrosion and carbon precipitation. All positional. Exceptional weld ability

14 In stock

All position, contact type welding electrode Very low distortion and warpage Welding bead is of x-ray quality. Outstanding welds deposit appearance

20 In stock

Basic type coating Ni. Cr-Fe deposit Outstanding strength and resistance to corrosion from normal to high temperatures. Positional welding capability. For overlay application minimum three layers must be deposited.

15 In stock

Work hardening type electrode with very high deposition rate. Extremely ductile and hence ideal for intricate and hardened manganese steel parts. Have very fast work hardening tendency, high abrasion resistance and resistance to deformation and cracking.

30 In stock

Hard surfacing electrode with excellent abrasion resistance at high temperature and exceptional metal recovery.

32 In stock

Hard surfacing electrode with very high metal recovery exceptional abrasion resistance at room temperature. Easy arc control in horizontal. No slag interference.

20 In stock

Quick and stable arc. Special alloys make the weld resistant to impact, while retaining hardness at relative elevated temperature due to secondary hardening. Crack-free, heavy build-up possible.

16 In stock

Chromium carbide deposit retains cutting edge. Excellent resistance to abrasion. Smooth bead appearance Easy application Low co-efficient of friction.

12 In stock

The deposit is work- hardening type and highly resistant to cracking and deformation during working. Excellent abrasion resistance in the work-hardened condition. Prolonged working life even when subjected simultaneously to impact and abrasion.

22 In stock

Basic all position electrode. The deposit is particularly resistant to impact. Thick surfacing without intermediate layers possible

20 In stock

The deposit is a high quality hot work steel, tough, wear resistant free from crack and porosities. The weld beads are smooth and uniform.

30 In stock

Superior dense and spatter free deposit. Resist high abrasion and moderate impact. Operative in all position Low heat

20 In stock

NEXA-DIETUF 100 is a newly developed electrode with Cr-Ni-Mo specially for forging die - repairs in forging industry. The special alloy addition makes the weld deposit suitable for using were higher level of strength, toughness and ductility is required. Weld deposit have good high temperature...

10 In stock

Special electrode with a coating which gives a stable arc during the cutting or piercing process. The kerfs are clean and narrow. Suitable for all position. Produces negligible stag.

50 In stock

Specially formulated low heat input austenitic. Stainless-steel electrode. Has excellent heat resistance up to 900°C and is resistant to corrosion by atmosphere, sea water, weak acid etc.

12 In stock

The weld metal is free from porosity and cracks. The bead is smooth and uniform. Excellent color match on bronze.

20 In stock

A thin coated electrode intended for welding of copper and copper tin-alloys. Best suited for joining copper or bronze to steels. Can also use for welding of cast irons without preheat if machinability is not required. Suited for cladding also.

30 In stock

Less base metal dilution reduced impurities impregnation. Very suitable for cladding. Excellent weld ability and high strength on most cast iron. Ideal for parts subjected to elevated temperature and corrosion

1030 In stock

Recommended for contaminated surface in old, dirty oily, greasy cast irons. Close color match for cast iron. Economical cast iron electrode. Crack resistant and high tensile strength. Nickel free deposits Quick freezing.

1040 In stock

Excellent machinability and ductility. Best color machining No pre-heating required. Nickel and copper alloy for good strength.

1040 In stock

Exceptional weldability. High nickel content. Weld deposits exhibit high strength and machinability. All positional welding alloys. It is a unique product for heavy section, structure and casting of big machineries of cast iron.

1030 In stock

Electrode with stable and soft arc, regular flow which can be used for multi position welding. Heat affected zone is easily machinable. Minimum penetration and hence very less dilution. No undercuts. Very fine and even weld ripples.

1020 In stock

All position electrode giving Cr/Ni/Mo weld deposit providing high strength, excellent resistance to chemical corrosion and heat

30 In stock

A unique all positional austenitic stainless steel welding alloy for AISI 309 & 310 stainless steel. Ideal for high oxidation resistance maintain high strength at temperatures up to 1200°C. Suitable for stainless steel of unknown analysis.

50 In stock

High work hardening in service. Highly crack resistance. Excellent all position welding. Superior resistance to impact deformation, heat and mild corrosion.

50 In stock

Easy Arc striking. Radiographic quality welds metal. Extra low carbon content. Suitable to resist heat corrosion and carbon precipitation. All positional. Exceptional weld ability

50 In stock

Easy arc striking Easy slag removal. Evenly rippled shining bead. The weld deposit can withstand temperatures up to 1150°C in continuous service. Use low current and short arc.

50 In stock

Special electrode with high blowing effect and producing hot exothermic penetrating arc. The molten metal is blown away quickly and provides good visibility. The cut is smooth and molten and blown away material can be removed easily. Does not damage the metal structure.

50 In stock

Easy Arc striking. Radiographic quality welds metal. Extra low carbon content. Suitable to resist heat corrosion and carbon precipitation. All positional. Exceptional weldability. Superior color match.

50 In stock

Resists pitting due to acids and highly concentrated chemicals. Requires low amperage, so as to avoid warpage. Deposition is rapid and smooth. Suitable for highly restrained joints. Moly bearing SS welding alloy. Suitable for AISI 316, 316L, and 318 stainless steels. Minimised carbide precipitation.

50 In stock

Controlled grain structure for high strength and for ductility. Controlled ferrite-austenite duplex structure. Low amperage, extremely low spatter, easy strike and re- strike. Weld bead is smooth, tough with superior crack resistance. Optimum resistance to friction, heat, corrosion impact

50 In stock

Controlled grain structure for high strength and for ductility. Controlled ferrite-austenite duplex structure Low amperage, extremely low spatter, easy strike and re- strike. Weld bead is smooth, tough with superior crack resistance. Optimum resistance to friction, heat, corrosion impact.

50 In stock

An extra low carbon, all position electrodes. Gives stable arc, low spatter, smooth weld profile, easily removable slag. The weld deposit is of radiographic quality and withstand temp. upto 1200°C.

50 In stock

Gives Austeno- ferritic crack resistance weld. Deal for welding unidentified steels. Gives smooth weld, with uniform ripples, with no slag interference. Deposit extremely tough.

50 In stock

NEXA-DIETUF 100 is a newly developed electrode with Cr-Ni-Mo specially for forging die - repairs in forging industry. The special alloy addition makes the weld deposit suitable for using were higher level of strength, toughness and ductility is required. Weld deposit have good high temperature...

50 In stock

Nexa-11018-M is a basic coated, low hydrogen type electrode specially designed for use in high strength applications and formulated to resist, cracking under conditions of high humidity and restraints. Weld deposit is of radiographic quality.

50 In stock