Connectwell

These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations.The wire is crimped to ring /fork type Lug (Ferrule) and is screwed on to flat current bar on the Terminal Block. The fastening nut always remains captive in the hinged...

These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations.The wire is crimped to ring /fork type Lug (Ferrule) and is screwed on to flat current bar on the Terminal Block. The fastening nut always remains captive in the hinged...

db35 distribution block are used for single phase distribution systems. These blocks can either be mounted on a Din Rail or can be Panel mounted.

These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations.The wire is crimped to ring /fork type Lug (Ferrule) and is screwed on to flat current bar on the Terminal Block. The fastening nut always remains captive in the hinged...

CMDB blocks are a modified version of the CDB terminal blocks without the central incoming terminal connection.

CMDB blocks are a modified version of the CDB terminal blocks without the central incoming terminal connection.

CMDB blocks are a modified version of the CDB terminal blocks without the central incoming terminal connection.

These Terminal Blocks are used for Grounding / Earthing Wires. They are Green-Yellow colour coded as per industries standard. They have the same top profile as their respective feed through Terminal Blocks.

These blocks are used for measuring, control, regulatory circuits and for current transformer connection application. They provide a clear functional advantage for devices having utility instruments and associated transformers. Circuit disconnection is achieved by opening the central slide link. Cross connection is possible with the...

These blocks are used measuring control and regulatory circuits. they provide a clear functional advantage for devices having utility instruments and associated transformers.in ckt6u disconnection is achieved by lifting a lever which operates the knife contact. Specially designed socket headed screws act as test monitoring...

These Terminal Blocks are used for Grounding / Earthing Wires. They are Green-Yellow colour coded as per industries standard. They have the same top profile as their respective feed through Terminal Blocks.

These blocks are ideal for use in applications requiring high density wiring . Interconnection / shorting is possible at both levels. CDL4UN is the newer version of the CDL4U Terminal Block. It is suited for 800 V application and can accommodate larger K6 marking tags.

These blocks are ideal for use in application requiring high density wiring. Interconnection shorting is possible at both levels. The CDLG2.5 is a double level terminal block with as additional connection point for earthing (Grounding) cables. This separate connection point is appropriately identified by the...

The CTLG2.5 is a triple level Terminal Blockwith an additional connection for earthing cables.This separate connection point is appropriatelyidentified by the green - yellow imprint on its top.This Terminal Block is an ideal choice formotor, sensor, actuator and initiator connections.

ODL4U Terminal Block , the top level is offset from the bottom level by half the thickness of the terminal block. this creates better access for the bottom level screw while the wires are connected. It is recommended to use End Plates at both ends...

These blocks are used for terminating Grounding/Earthing wires. They are green-yellow coded as per industry standards. CGMT4 is suitable for DIN 15 micro rail & can be used in conjunction with CMT4 Terminal Blocks.

These Terminal Blocks are used in electrical and control systems which require fuse protection. This Terminal Blocks accepts industry standard 6.3 X 32 mm glass cartridge fuses.

These Terminal Blocks are used for measuring, control and regulatory circuits. They Provide a clear functional advantage for devices having utility instruments and associated transformers. in this Terminal Block disconnection is achieved by means of a slide link operated by screwdriver. Specially designed socket headed...

These blocks are used measuring control and regulatory circuits. they provide a clear functional advantage for devices having utility instruments and associated transformers.in CKT4SPH disconnection is achieved by simply lifting a lever by hand which operates the knife contact. Specially designed socket headed screws act...

The CDS6U/FTSS is feed through for Disconnect & Test Terminal Block is used for measuring, control and regulatory circuits. they provide a clear functional advantage for devices having utility instruments and associated transformers. Separate testing points facilitate insertion of test probes. Disconnection is archived by...