Eaton

Redapt 90 degree and In-Line series of explosion-proof swivel adaptors provide a method of matching electrical thread forms on hazardous area approved equipment. Ensuring the integrity and Ex approval of the installation is maintained, the range's swivel feature enables a full 360 degree choice of...

Redapt stopping plugs provide a method of blanking off unused entries in hazardous area approved equipment whilst ensuring the integrity and Ex approval of the installation is maintained.​ Options in the range include the Exd flameproof/Exe increased safety series, the Exde type A & type...

Redapt explosion-proof shaped adaptors provide an opportunity for installers to run cables in additional entries where pre-machine entries are limited or at an angle in confined or difficult situations. Compared to traditional methods of creating additional entries in enclosures Redapt shaped adaptors can reduce downtime...

Redapt series of explosion-proof metallic adaptors and reducers provide a method of matching electrical thread forms on hazardous area approved equipment whilst ensuring the integrity and Ex approval of the installation is maintained. Designed for hazardous area applications and the ranges are certified to protection...

Redapt DB series of insulated adaptors provide a method of insulating a cable gland and the cable armour from the equipment into which it has been fixed. Insulated adaptors provide a vital safety precaution for systems with sensitive electronic equipment that are reliant on an...

Redapt AE-E series Exe "increased safety" earth lead adaptors provide a method of bonding a cable gland or conduit termination to a grounding point within an explosion-proof enclosure.

Redapt DP-E series of Exe breather drains provide a method of preventing moisture build-up within a hazardous area approved enclosure whilst ensuring the integrity and Ex approval of the installation is maintained. They allow for air within an enclosure to breathe with the surrounding atmosphere...

Redapt BD-U series of Exd “Flameproof” and Exe “Increased Safety” breather drains has a primary function of effectively draining any water present within the enclosure. Alongside draining water, it also allows air in the enclosure to breathe with the surrounding atmosphere, minimizing moisture build-up; preventing condensation...

The Raxton DK series of threaded earth plates provide a method of bonding a cable gland or conduit termination to a grounding point within an enclosure.

Eaton offer different families of plugs to meet each of your applications: the locking plug (CF), the flush plug (CB), the solid plug with hexagonal head (CK), the round plug (CQ), the hollow plug with hexagonal head (CY) and our new polyamide plug with hexagonal...

The Raxton stopper boxes & barrier fittings are designed to seal conductors at the entry to an enclosure via rigid or liquid-tight flexible conduit.  This is achieved by using a fast setting compound to form a barrier between the individual conductors within the cable to...

The Raxton stopper boxes & barrier fittings are designed to seal conductors at the entry to an enclosure via rigid or liquid-tight flexible conduit.  This is achieved by using a fast setting compound to form a barrier between the individual conductors within the cable to...

Adaptors and reducers provide a mean of connection between dissimilar thread forms or sizes. Nylon adaptors and reducers are Exe only and produced with a round body. EPDM O-ring and an undercut are fitted to maintain the IP integrity of the installation.

Raxton Adaptors & reducers provide a mean of connection between dissimilar thread forms or sizes. Both offer Exd flameproof and Exe increased safety protection. The Exd / Exe reducers effectively reduce the threaded entry diameter of an enclosure to accept a gland or fitting with...

Raxton's range of accessories for thread form conversion includes DM earth tags, nipples, couplers, brushes, GA locknuts, shrouds, O-ring washers, serrated washers and DN earthing locknuts.

Crouse-Hinds series Quick-Lok Pro connectors improve job site productivity when installing armored cable, metal-clad cable, MCI-A cable, MC-PCS cable or flexible metallic conduit to a box or enclosure.  No tools are needed for installation.  Simply insert the cable or conduit into the connector and install...

Crouse-Hinds series Quick-Lok AC/MC connectors are used to connect armored cable, metal-clad cable or flexible metallic conduit to a box or enclosure.  Single unit construction eliminates loose component parts, and a captive clamp eliminates the need for a locknut.  Available in 1/2" single or 1/2"...

Crouse-Hinds series non-metallic PVC ceiling boxes and ceiling fan boxes are used in the installation of lighting fixtures and ceiling fans.

600 denier nylon in attractive charcoal gray and black Spacious main compartment holds the largest notebooks and features a removable padded sleeve for additional protection Front, side and internal pockets accommodate a variety of accessories Comfortable padded shoulder strap, grip handle and self-repairing zippers This...

Compact hub expands your Apple USB-C PD Charger from one to 4 charging ports, allowing you to charge 4 mobile devices at the same time. Expands an Apple MacBook Pro 61W/87W PD charger to 3 USB-A and 1 USB-C ports USB-C PD 3.0 port features...

Eaton’s pneumatic wing and tail actuators provide up to 15,000 psi of pneumatic pressure to deploy the wings and tail fin of missiles to their full open flight position in one tenth of a second increasing the stability and range of stand-off, smart weapons. Eaton...

Eaton’s pneumatic ejection valves provide the energy to rapidly unlock weapon release linkages and extend ejector pistons of weapon release systems on military bomb racks and carriages. Our valves feature cold gas deployment using nitrogen or compressed air and can integrate with cold gas stored...

Eaton's pneumatic compressor systems provide on-aircraft pneumatic pressurization capability with integrated motor control and moisture removal and include high pressure gas generation and dual phase cooling applications. Our compressor systems are qualified to the strictest military environmental standards and can be used on fixed- and...

B-Line series pipe clamps to support conduit and pipes in electrical, datacomm, mechanical, plumbing, heating, air conditioning, and refrigeration in commercial, industrial and utility applications. Designed for use with Eaton’s B-Line series strut systems, B-Line series supports include: Metal pipe clamps Pipe fitting clamps Roof...

Pauluhn JUSN non-metallic conduit outlet boxes from Eaton's Crouse-Hinds Division are designed for use in industrial locations where a watertight seal is required.   Constructed from reinforced polyethylene terephthalate (PET). The JUSN conduit outlet box is ideal for waste water, pulp and paper, and food and...

Pauluhn HFS hazardous area device box and cover from Eaton's Crouse-Hinds Division are designed for use in hazardous locations.   Made with heavy wall construction with a neoprene gasket that resists petroleum and provides a watertight seal. Constructed from cast copper-free aluminum.

Available in the Middle East and Asia regions, the B-Line series perforated and solid bottom cable pan tray system is ideal for instrumentation and electrical cable runs in industrial or commercial cable management applications, helping eliminate the need for conduit or ladder.  Eaton's B-Line series...

Built-in cooling fans dissipate heat away from the bottom of your notebook and cool down the overall temperature of your system USB-powered for use with any computer USB port Heavy-duty construction withstands the constant pressure of heavy notebooks 3 viewing angles - 15, 30 and...

For use with portable cord, Crouse-Hinds series NCG and NCGB watertight cord grips terminate and protect conductors from mechanical damage due to vibration and movement.  A neoprene bushing seals out oils, coolants, water, dust and other abusive agents.  NCG and NCGB cord grips may be...

Discover a full range of various accessories for enhanced earthing, retention and assembly of the MN 823 C glands. This range is composed of castellated locknuts, stopping plugs, gaskets, etc.

The B-Line series metric cable ladder system is solely designed to increase productivity and decrease project cost and engineering complexity by reducing the number of structural steel supports needed for cable ladder systems in heavy industrial environments. The result is a lower total installed cost...

Crouse-Hinds series locknuts, nipples, washers, reducers and plugs are used with rigid/IMC conduit: To secure conduit to an outlet box or enclosure To join enclosures or conduit bodies together To reduce the threaded opening on conduit bodies and female threaded fittings To plug an unused...

Eaton's Crouse-Hinds series Link-Seal is the quick, economical way to seal around conduit in concrete walls, floors and casings.  Link-Seal is a modular mechanical seal used for any type of penetration.

Crouse-Hinds series LCC cable tray conduit clamps provide a means of clamping metal conduit (rigid steel or aluminum, IMC and EMT) to cable tray to allow for the safe exit of power and/or control cables from the tray.  LLCs provide strong mechanical support and firmly...

With an innovative dove tail splice design, Eaton’s B-Line series KwikSplice cable channel is designed to reduce complexity, improve versatility and speed installs.   The system is ideal for light duty cable support runs replacing conduit in a variety of industrial and commercial applications.   Data centers...

The KwikRail cable tray system is ideal for commercial and data center cable management for 12A and 12B load classes.  Its innovative design and accessories allow installers to easily and quickly modify the tray on the jobsite. Fast, easy to modify tray in the field...