Sensors and Controllers

The LFC capacitive level switch is a flexible, simple and cost-effective solution for point level measurement in fluid media. Using IO-Link, the sensor can be parameterized for many media. The LFC is especially suitable for measurements in containers or for dry-run protection in piping. The...

The LFP Cubic is a level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal. The sensor can...

The vibrating level switches in the LBV301 product family can be relied upon to signal full, empty, or demand states in bulk materials. The monoprobe design prevents bulk materials from jamming. The rugged stainless steel sensor design is piezo-electrically energized. When the probe is covered...

The LBR SicWave free-space radar makes continuous level measurements and works with all solids. It is highly resistant to external interference, dust or deposits. Thanks to its non-contact 80 GHz radar technology, the LBR SicWave can be put into operation easily and is maintenance-free. A wide...

SICK offers a pre-assembled upgrade kit allowing the simple replacement of MSL opto-electronic protective devices, which is perfectly matched to the latest machine and system safety requirements. With the upgrade kit MSL to M4000, MSL protective devices can be replaced quickly and easily with the...

Together with the M4000 Advanced multiple light beam safety device, the UE403 muting switching amplifier forms an efficient solution for remote, conventional muting applications with automated material transport. Its integrated functions, which can be configured easily via the RS-232 interface using a computer, and the...

Free choice of space for the safety: Mirror columns from SICK are used in applications where protection of hazardous points, e.g. machining centers, on several sides is required. The combination of multiple light beam safety devices with mirror columns used for beam deflection is the...

The M4000 Standard A/P multiple light beam safety device is the economical solution for access protection. It is particularly economical since only the active side must be wired, which reduces the installation time. The M4000’s large scanning range and extensive functions provide efficient access protection...

The M4000 Advanced multiple light beam safety device with the UE403 muting switching amplifier is an efficient solution for conventional muting applications involving automatic material transport. The configuration via PC and the on-site connection of the muting signals ensure maximum reliability. Various mounting adapters and...

The M4000 Standard multiple light beam safety device is the solution for one-sided or multi-sided access protection. The M4000’s large scanning range and extensive functions provide efficient access protection and maximum reliability. The functions are easy to understand and are set via the configuration keys located...

The M4000 Advanced multiple light beam safety device with the UE403 muting switching amplifier is an efficient solution for conventional muting applications involving automatic material transport. The configuration via PC and the on-site connection of the muting signals ensure maximum reliability. Various mounting adapters and innovative...

The M2000 Standard A/P multiple light beam safety device is an ideal solution for simple access protection. It is particularly economical since only the active side must be wired, which reduces the required installation considerably. The functions are easy to understand and the mechanical and electrical interfaces...

The M2000 Standard multiple light beam safety device is an economical solution for one-sided or multi-sided access protection. High scanning ranges and high signal reserves open a wide range of application possibilities, even under harsh ambient conditions. The functions are easy to understand and the mechanical...

The M2000 RES/EDM A/P multiple light beam safety device is an ideal solution for simple access protection. Similar to the M2000 A/P Standard, this safety device is particularly economical since only the active side must be wired, which reduces the required installation considerably. In addition,...

The M2000 RES/EDM multiple light beam safety device is an economical solution for one-sided or multi-sided access protection. The integrated restart interlock (RES) provides shorter cable runs and reduced commissioning times. High scanning ranges and high signal reserves open a wide range of application possibilities,...

The M2000 Cascadable multiple light beam safety device is an economical solution for one-sided or multi-sided access protection. With the M2000 Cascadable, up to three devices can be connected in a cascadable system. This reduces wiring costs and enables flexible integration into existing applications. The...

The heatable device column is used to mount M4000 multiple light beam safety devices in outdoor areas. The sender and receiver are mounted in the columns. The heater mounted on the front screen prevents the screen from fogging up and also ensures that the multiple...

The deTem multiple light beam safety devices offer high flexibility and efficiency for access protection as well as for entry and exit monitoring with muting. The deTem features a compact housing and stands out not only due to its smart functions, but also thanks to...

Intuitive project planning of SICK safety sensors and safety controllers is carried out using the free Safety Designer configuration software. With the software, you simply select hardware components and link logic functions. For you, this means quick configuration of safety controllers, safety switches and other...

The free Flexi Soft Designer configuration software allows for clear and simple configuration for the Flexi Soft safety controller. This is done in just three steps: Hardware configuration, logic creation and transfer of the configuration to Flexi Soft as well as verification. The software provides...

The Flexi Mobile safety controller is the answer to safety requirements for dynamic mobile robots. With the rugged aluminum housing and a smart installation concept, you can integrate Flexi Mobile into AGVs and AMRs in a space-saving manner. An additional control cabinet is no longer...

The Flexi Compact safety controller is based on a future-proof technology platform and can be programmed via software. Thanks to its modularity, it can be optimally configured for a wide range of application requirements and its compact construction means it can be installed in tight...

The Flexi Classic modular safety controller enables straightforward configuration without any software. This allows the user to adapt the logic evaluation settings to the requirements of the application concerned. Logic functions are configured through rotary switches. These switches are located directly on the modules, enabling...

The V300 Work Station Extended provides innovative camera technology as standard. The clever device concept integrates the sender and receiver so that they can be mounted in corners, for example, to save space. This allows smooth integration into the work environment. The V300's camera sensor...

The V200 Work Station Extended provides innovative camera technology as standard. The clever device concept integrates the sender and receiver so that they can be mounted in corners, for example, to save space. This allows smooth integration into the work environment. The V300's camera sensor...

With the world’s first 3D time-of-flight camera with performance level c safety certification, SICK is opening a new dimension in safety technology. safeVisionary2 allows safe three-dimensional environment perception that you can use to increase the safety and efficiency of your applications. Thanks to the precise...

The Flexi Soft safety controller can be programmed via software. Thanks to the modular hardware platform, Flexi Soft provides a tailored and efficient solution for a whole host of safety applications. A wide range of modules are available: main modules, gateways, digital and analog input/output...

The Standstill Monitor MOC3ZA is a safety device for machine drives and serves to protect against dangerous movements. It also measures the residual voltage meaning that no additional sensors are required for the purpose of standstill monitoring. This renders the device suitable for applications with...

The Speed Monitor is a zero-speed drive monitor that protects against dangerous movements by safely monitoring speed. It has different safety drive functions, such as SLS (safety limited speed) and SSM (safe speed monitor). In addition, the MOC3SA offers different operating modes: one mode with...

The Flexi Soft Drive Monitor monitors the movement, speed, direction and position of machine parts. Thanks to its high-performance logistics functions, it efficiently solves challenging mobile safety applications in the logistics sector. In stationary applications, the Flexi Soft Drive Monitor increases productivity with reliable speed...

To offer customers a complete, scalable 2D LiDAR sensor portfolio, SICK is supplementing the TiM series to include safety-related sensors which satisfy performance level b: TiM-S devices. They were developed, among other things, for mobile applications such as mobile platforms, automated guided vehicles (AGVs) and...

S3000 hands over baton to microScan3: After many years of successful use in countless industries, the S3000 safety laser scanner is now handing over the baton to its successor, the microScan3. Thanks to the comprehensive portfolio, the microScan3 has the right successor product for your...

S3000 hands over baton to microScan3: After many years of successful use in countless industries, the S3000 safety laser scanner is now handing over the baton to its successor, the microScan3. Thanks to the comprehensive portfolio, the microScan3 has the right successor product for your...

Thanks to its compact housing, the S300 Mini safety laser scanner is especially suited for use when space is at a premium, e.g., for hazardous area protection on automated guided vehicles or on machines with little space. Numerous field sets allow the simultaneous use of...

The S300 safety laser scanner is suitable for horizontal and vertical hazardous area protection. For quick and easy commissioning, the device is configured using the PC-based CDS software. The S300 can be operated in a host-guest network via the EFI interface or connected directly to...

The outdoorScan3 safety laser scanner protects people outdoors in a wide range of mobile and stationary applications. Thanks to intelligent algorithms and the outdoor safeHDDM® scanning technology, the sensor achieves high productivity even in unfavorable weather conditions. The outdoorScan3 stands out thanks to the rugged...

The nanoScan3 is the smallest safety laser scanner from SICK. It is well suited for the protection and localization of mobile platforms. Thanks to the reliable safeHDDM® scanning technology, it delivers high-precision measurement data and is extremely resistant to light, dust or dirt. The easy...

The microScan3 safety laser scanner stands for the protection of very different applications: from stationary to mobile, from simple to complex. The innovative safeHDDM® scanning technology makes the microScan3 extremely resistant, even to dust and ambient light, and delivers high-precision measurement data. It increases the...

Safety laser scanner visualization is the ideal software solution for visualizing and analyzing all diagnostic and device information from all safety laser scanners integrated in the network in real time. The software can be quickly and seamlessly integrated into existing infrastructures such as Windows-based SCADA...

The UM18 sensor product family provides simplicity and high functionality. The UM18 ultrasonic sensors are available in straight and angled versions for easy machine integration. A metal or plastic housing allows use in demanding ambient conditions. Due to four sensing ranges up to a total...

The UD18-2 specializes in checking for double layers and splices using ultrasonic technology. Operating with precision, it is able to determine whether one, two or no material layers are present between its sender and receiver. Where the UD18-2 really excels is checking for double layers...

The UC4 ultrasonic sensor family combines state-of-the-art ultrasonic technology in a miniature housing. With reliable functionality in even difficult operating conditions, the UC4 is a real miniature all-rounder when it comes to demanding, specialized tasks such as detecting transparent objects or measuring the levels of...

The UC12 product family in the proven cubic metal housing is very rugged and at the same time easy to handle. Thanks to complementary digital outputs with IO-Link, it combines high flexibility with the well-known reliability of ultrasonic technology.

The ISO 13849-certified Safe Brake Assist safety system prevents collisions with people and infrastructure in outdoor areas. It does so using 3D LiDAR sensors that continuously measure the distance between the vehicle and potential obstacles along the vehicle’s path based on vehicle movement data. This ensures...

Together with the UE403 muting switching amplifier, the M4000 Advanced Curtain safety light curtain forms an efficient solution for conventional muting applications with automated material transport. It is particularly well suited when high resolutions are required due to short safety distances. Simple configuration via PC...

The WTT12-S safety sensor is well-suited for simple reliable detection of objects in mobile and stationary applications. The sensor reliable detects fall edges by means of optical time-of-flight measurement. This is how the WTT12-S allows your automated guided vehicle or service robot to travel safely....

With the DT35-S, SICK is offering a safety distance sensor for the protection of persons and capital goods up to performance level b. Thanks to its large measuring range, the DT35-S can be used for safe presence monitoring in intralogistics and for precise, safe lifting...

The RMS2000 radar sensor detects objects very reliably, even under especially harsh ambient and weather conditions, e.g., in strong rain or snowfall, thick fog, or high dust loads. Detection fields can be flexibly configured in the working range of the sensor. This enables the RMS2000...