Sensors and Controllers

Set from light guard (Type 4, PL e, body protection), bracket and mutingarm T-type in accordance with DIN EN 61496, Type 4, 500 mm, connector M12,transmitter: 4-pin and 5-pin, receiver: 5-pin and 8-pin, connection cable not supplied with the device.

Safety light guard, Type 4, PL e, body protection, protected fieldheight 900 mm, muting function, supply voltage 24 V, connector M12, transmitter: 4-pin and 5-pin, receiver: 5-pin and 8-pin, connection cable not supplied with the device.

Safety light guard, Type 4, PL e, body protection, protected fieldheight 800 mm, muting function, supply voltage 24 V, connector M12, transmitter: 4-pin and 5-pin, receiver: 5-pin and 8-pin, connection cable not supplied with the device.

The PSEN op3.3 Reflex NO/NC M12 by Pilz is a versatile optical safety device designed for reliable detection in industrial applications. Featuring both Normally Open (NO) and Normally Closed (NC) configurations, it allows for flexible integration into safety systems. Its M12 connector ensures easy installation,...

The PSEN op3.2 Emitter M12 by Pilz is designed for optimal performance in safety applications, emitting a precise optical signal to enhance detection capabilities. Its M12 connector facilitates easy installation and integration into various safety systems. With robust construction, this emitter ensures reliability and durability,...

The PSEN op SL Testpiece F 24 mm by Pilz is designed for testing and validating the functionality of optical safety devices. This precise test piece ensures accurate alignment and reliable operation in safety applications. Its durable construction allows for dependable use in various industrial...

Safety light beam device, Type 2, PL c, body protection, infraredsensor, connection receiver: 4-pin M12 male connector, connection transmitter:4-pin M12 male connector, connection cable not supplied with the device.

Safety light guard, Type 2, PL c, hand protection (resolution 24 mm), protected field height 1200 mm. Features: Cascading without dead zone,slimline design. Supply voltage 24 V, connector M12, transmitter: 5- pin, receiver 5-pin. Connection cable is not supplied with the device.

Safety light guard, Type 2, PL c, hand protection (resolution 24 mm), protected field height 1050 mm. Features: Cascading without dead zone,slimline design. Supply voltage 24 V, connector M12, transmitter: 5- pin, receiver 5-pin. Connection cable is not supplied with the device.

Safety light guard, Type 2, PL c, hand protection (resolution 24 mm), protected field height 900 mm. Features: Cascading without dead zone,slimline design. Supply voltage 24 V, connector M12, transmitter: 5- pin, receiver 5-pin. Connection cable is not supplied with the device.

Safety light guard, Type 2, PL c, hand protection (resolution 24 mm), protected field height 750 mm. Features: Cascading without dead zone,slimline design. Supply voltage 24 V, connector M12, transmitter: 5- pin, receiver 5-pin. Connection cable is not supplied with the device.

Safety light guard, Type 2, PL c, hand protection (resolution 24 mm), protected field height 600 mm. Features: Cascading without dead zone,slimline design. Supply voltage 24 V, connector M12, transmitter: 5- pin, receiver 5-pin. Connection cable is not supplied with the device.

Safety light guard, Type 2, PL c, hand protection (resolution 24 mm), protected field height 450 mm. Features: Cascading without dead zone,slimline design. Supply voltage 24 V, connector M12, transmitter: 5- pin, receiver 5-pin. Connection cable is not supplied with the device.

Safety light guard, Type 2, PL c, hand protection (resolution 24 mm), protected field height 300 mm. Features: Cascading without dead zone,slimline design. Supply voltage 24 V, connector M12, transmitter: 5- pin, receiver 5-pin. Connection cable is not supplied with the device.

Safety light guard, Type 2, PL c, hand protection (resolution 24 mm), protected field height 150 mm. Features: Cascading without dead zone,slimline design. Supply voltage 24 V, connector M12, transmitter: 5- pin, receiver 5-pin. Connection cable is not supplied with the device.

Safety light guard, Type 2, PL c, hand protection (resolution 30 mm), protected field height 1650 mm, supply voltage 24 V, connector M12, transmitter: 4-pin, receiver: 5-pin, connection cable not supplied with the device.

Safety light guard, Type 2, PL c, hand protection (resolution 30 mm), protected field height 1500 mm, supply voltage 24 V, connector M12, transmitter: 4-pin, receiver: 5-pin, connection cable not supplied with the device.

Safety light guard, Type 2, PL c, hand protection (resolution 30 mm), protected field height 900 mm, supply voltage 24 V, connector M12, transmitter: 4-pin, receiver: 5-pin, connection cable not supplied with the device.

Safety light guard, Type 2, PL c, hand protection (resolution 30 mm), protected field height 600 mm, supply voltage 24 V, connector M12, transmitter: 4-pin, receiver: 5-pin, connection cable not supplied with the device.

Safety light guard, Type 2, PL c, hand protection (resolution 30 mm), protected field height 450 mm, supply voltage 24 V, connector M12, transmitter: 4-pin, receiver: 5-pin, connection cable not supplied with the device.

Safety light guard, Type 2, PL c, hand protection (resolution 30 mm), protected field height 1650 mm. Features: Muting, blanking, cascading, absence of dead zones. Programming is possible via Software PSENoptConfigurator or directly on the light guard. Supply voltage 24 V, connection via 18-pin pigtail...

Safety light guard, Type 2, PL c, hand protection (resolution 30 mm), protected field height 1350 mm. Features: Muting, blanking, cascading, absence of dead zones. Programming is possible via Software PSENoptConfigurator or directly on the light guard. Supply voltage 24 V, connection via 18-pin pigtail...

Safety light guard, Type 2, PL c, hand protection (resolution 30 mm), protected field height 1050 mm. Features: Muting, blanking, cascading, absence of dead zones. Programming is possible via Software PSENoptConfigurator or directly on the light guard. Supply voltage 24 V, connection via 18-pin pigtail...

Safety light guard, Type 2, PL c, hand protection (resolution 30 mm), protected field height 750 mm. Features: Muting, blanking, cascading, absence of dead zones. Programming is possible via Software PSENoptConfigurator or directly on the light guard. Supply voltage 24 V, connection via 18-pin pigtail...

Safety light guard, Type 2, PL c, hand protection (resolution 30 mm), protected field height 450 mm. Features: Muting, blanking, cascading, absence of dead zones. Programming is possible via Software PSENoptConfigurator or directly on the light guard. Supply voltage 24 V, connection via 18-pin pigtail...

Safety light guard, Type 2, PL c, body protection, protected field heigh 1200 mm, muting function, supply voltage 24 V, connector M12, transmitter: 4-pin and 5-pin, receiver: 5-pin and 8-pin, connection cable not supplied with the device.

Safety light guard, Type 2, PL c, body protection, protected fieldheight 900 mm, muting function, supply voltage 24 V, connector M12, transmitter: 4-pin and 5-pin, receiver: 5-pin and 8-pin, connection cable not supplied with the device.

Safety light guard, Type 2, PL c, body protection, protected fieldheight 800 mm, muting function, supply voltage 24 V, connector M12, transmitter: 4-pin and 5-pin, receiver: 5-pin and 8-pin, connection cable not supplied with the device.

Safety light guard, Type 2, PL c, body protection, protected field heigh 500 mm, muting function, supply voltage 24 V, connector M12, transmitter: 4-pin and 5-pin, receiver: 5-pin and 8-pin, connection cable not supplied with the device.

The PSEN op2.4 L-Reflector by Pilz is engineered to enhance the performance of optical safety devices by providing efficient signal reflection. This high-quality reflector ensures reliable detection and monitoring in safety applications, contributing to overall operational safety. Its durable design allows for easy installation in...

The PSEN op2.3 L-Reflex by Pilz is a high-performance optical safety device designed for reliable detection and safety in industrial environments. This reflex sensor utilizes advanced technology to ensure precise monitoring of safety zones. Its durable construction and compact design facilitate easy installation, making it...

The PSEN op2.2 T-Muting Set by Pilz is designed to enhance the safety and functionality of optical safety devices in industrial applications. This set allows for efficient muting operations, enabling safe access to hazardous areas while maintaining reliable monitoring. Its robust construction ensures durability and...

The PSEN op test piece H 30mm by Pilz is designed for testing and validating the performance of optical safety devices. This precise test piece ensures accurate alignment and functionality in safety applications. Its robust construction allows for reliable use in various industrial environments, contributing...

The PSEN op test piece F 14mm by Pilz is specifically designed for testing and verifying the functionality of optical safety devices. Its compact size ensures precise alignment and effective performance in safety applications. Constructed for durability, this test piece provides reliable operation in various...

The PSEN op SL Testpiece F 24 mm by Pilz is designed for testing and validating the functionality of optical safety devices. This precise test piece ensures accurate alignment and reliable operation in safety applications. Its durable construction allows for dependable use in various industrial...

The PSEN op SL Bracket O by Pilz is designed for secure mounting of optical safety devices, ensuring optimal alignment and stability in industrial applications. This robust bracket features a durable construction that enhances the reliability and performance of safety systems. Its easy installation makes...

The PSEN op SL Bracket L by Pilz is designed to offer secure and adjustable mounting for optical safety devices in various industrial applications. This robust bracket ensures optimal positioning and stability, enhancing the overall performance and reliability of safety systems. Its durable construction allows...

The PSEN op SL Bracket C by Pilz is designed to provide secure and flexible mounting for optical safety devices in industrial environments. This durable bracket ensures optimal alignment and stability, enhancing the reliability of safety systems. Its robust construction allows for easy installation, making...

The PSEN op reflector by Pilz is designed to enhance the performance of optical safety devices by ensuring optimal signal reflection. This durable reflector is engineered for easy installation and reliable operation in various industrial environments. Its robust design improves the effectiveness of safety systems,...

Aluminium profile with a length of 190 cm. Combined with "PSEN opProtective Base/1" and the matching mounting brackets "PSEN op Protective Bracket" protection of light guards or deviating mirrors from strong mechanical effects is achieved.

Aluminium profile with a length of 165 cm. Combined with "PSEN opProtective Base/1" and the matching mounting brackets "PSEN op Protective Bracket" protection of light guards or deviating mirrors from strong mechanical effects is achieved.

Aluminium profile with a length of 120 cm. Combined with "PSEN opProtective Base/1" and the matching mounting brackets "PSEN op Protective Bracket" protection of light guards or deviating mirrors from strong mechanical effects is achieved.

Aluminium profile with a length of 60 cm. Combined with "PSEN opProtective Base/1" and the matching mounting brackets "PSEN op Protective Bracket" protection of light guards or deviating mirrors from strong mechanical effects is achieved.

Integral mirrors for body protection resolution including PSEN op Protective Column with a length of 165 cm for a beam distance of 400 mm. Number of mirrors: 4. As a possible accessory, the fixed base unit "PSEN op Protective Base" can be fastened.

Integral mirrors for body protection resolution including PSEN op Protective Column with a length of 165 cm for a beam distance of 300 mm. Number of mirrors: 4. As a possible accessory, the fixed base unit "PSEN op Protective Base" can be fastened.

Integral mirrors for body protection resolution including PSEN op Protective Column with a length of 120 cm for a beam distance of 400 mm. Number of mirrors: 3. As a possible accessory, the fixed base unit "PSEN op Protective Base" can be fastened.

Mounting kit with 6 mounting profiles for fixing a safety light guard of the series "PSEN op.../1" for light guard lengths of over 120 cm into the matching aluminium profile PSEN op Protective Column/1.

Mounting kit with 4 mounting profiles for fixing a safety light guard of the series "PSEN op.../1" for light guard lengths of 15 cm up to including 120 cm into the matching aluminium profile PSEN op Protective Column/1.