+91-9818376733
The FLG (frame light grid) switching automation light grid is the innovative solution in which the sender and receiver are combined in one housing for the detection of small parts. The complicated individual adjustment of sender and receiver is now longer necessary. In dynamic operating...
SICK offers the versatile ELG, an extremely tough switching automation light grid with different monitoring heights and beam separations. The ELG is not sensitive to glare caused by sunlight and flashing light. Typical applications are in logistics for checking for projections on pallets and counting...
The FLG (frame light grid) switching automation light grid is the innovative solution in which the sender and receiver are combined in one housing for the detection of small parts. The complicated individual adjustment of sender and receiver is now longer necessary. In dynamic operating...
The inclination sensors from the TMS/TMM88 Dynamic product family are setting new standards with respect to signal quality and response time. Thanks to an intelligent sensor fusion filter, not only are they extremely quick to respond – they are also highly precise, even when influenced...
The TMS88 one-dimensional inclination sensor and the TMM88 two-dimensional inclination sensor take measurements with an accuracy of up to +/- 0.02°. The inclination value is provided either via a current or voltage interface with a linearized output signal or via a standardized CANopen interface. The...
The TMS61 one-dimensional inclination sensor and the TMM61 two-dimensional inclination sensor are setting new standards with respect to size, flexibility, and performance. In their small, rugged plastic housings, the sensors offer excellent resolution and accuracy – what's more, this is achieved over the entire measuring...
The TMS22 (single-axis) and TMM22 (dual-axis) inclination sensors provide very precise, cost-effective inclination measurements. The foundation for this is powerful MEMS technology, which scores points with an error tolerance of ± 0.1° and high repeatability. The measured values are output via a linearized analog signal. In...
The RFU65x RFID read/write device saves space, time, and costs when it comes to identifying vehicles and vehicle parts. This compact device is able to determine the angle from which the transponder responds. The RFU65x also features an integrated logic unit that processes data on...
The RFU63x is an ultra-high frequency (UHF) RFID solution for industrial environments. Via integrated application management software, the RFU63x is able to solve common industrial applications without any external "middleware" and can, therefore, be used as a stand-alone solution. This is possible due to an...
The RFU62x is a UHF RFID read/write device suitable for read ranges of up to 1 m. The transponder communication is compliant with standard ISO/IEC18000-6C (EPC Class 1 Gen 2). The device can be configured to operate from the SOPAS user interface or by sending ASCII commands...
The RFU61x is the smallest read/write device in the UHF portfolio from SICK. It is perfectly suited for IoT applications directly on the workpiece or component. The RFU61x therefore rounds out the UHF product portfolio from SICK by enabling continuous identification along the entire value...
Industry-compliant RFID antennas from SICK are available for both the HF and UHF frequency ranges. The large range of sizes offers the right antenna for every application and installation situation. The rugged design was developed specially for the challenging application conditions in industrial environments and...
The Vehicle Hotspot Detection System profiling system combines thermal imaging cameras and 2D LiDAR sensors to detect overheated vehicles. The system can be used to detect and divert these vehicles, for example before entering tunnels, before being transported by RoRo ships, at road-rail loading terminals,...
The TICx02 (traffic information controller) profiling system accurately classifies vehicles in free-flowing traffic. The vehicles are scanned up to 100 times a second using eye-safe 2D LiDAR sensors. The measurement data can be used to generate a 3D model of each vehicle. The system can also...
The load volume measurement system measures the load volume of truck loads on flatbed loading areas or the remaining loading volume of dump trucks in a single pass and without the need for the vehicle to come to a stop. Having precise data on load...
The Free Flow Profiler profiling system measures and classifies vehicles and objects of all types in free-flow traffic conditions. Eye-safe 2D LiDAR sensors scan objects up to 75 times a second, thereby enabling fully-automated length, width and height measurement. The vehicle speed and direction of movement...
A precise reference map is the foundation for high availability of automated guided vehicles (AGVs) in environments in which localization must be done without additional reflector marks. The position of the AGV is determined by comparing the scan data of a SICK 2D LiDAR sensor...
The DAS picoScan100 is an advanced Drive Assist System (DAS) designed for precise object detection and distance measurement. It uses cutting-edge sensor technology, such as LiDAR or radar, to detect and monitor objects in real-time. This system is typically used in autonomous vehicles or robotics...
The Overheight Detection System (OHD) is an object detection system that reliably detects overheight vehicles thereby avoiding hazardous situations. Thanks to digital inputs and outputs, the immediate alert can be combined with cameras and display panels. The incorporated LiDAR sensor with weather protection hood and...
The Backup Assistance System (BAS) minimizes the risk of collisions for manned forklift trucks. It monitors areas of the vehicle which are obstructed from view of the driver. The BAS gives real-time feedback via visual and audible warnings when the forklift truck comes near a...