Connector

In the CDL4UN(I.S) Terminal Blocks, both levels are internally shorted. These blocks are useful for distribution application with the aid of shorting links at the lower level.

These blocks have fuse carrier link on the top level and a separate feed through terminal connection at the lower level. This eliminates the use of additional Terminal Block

These blocks are used measuring control and regulatory circuits. they provide a clear functional advantage for devices having utility instruments and associated transformers. In CYDLK4 disconnection is achieved by lifting a lever which operates the knife contact. Specially designed socket headed screws act as test...

These Terminal Blocks are used in electrical and control systems which require fuse protection. This Terminal Blocks accepts industry standard 6.3 X 32 mm glass cartridge fuses.

CMDB blocks are a modified version of the CDB terminal blocks without the central incoming terminal connection.

These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations.The wire is crimped to ring /fork type Lug (Ferrule) and is screwed on to flat current bar on the Terminal Block. The fastening nut always remains captive in the hinged...

db35 distribution block are used for single phase distribution systems. These blocks can either be mounted on a Din Rail or can be Panel mounted.

These Terminal Block are modified version of the ddfl4u where two equi-potential connection points are available on both sides of the Terminal

These Terminal Block are modified version of the ddfl4u where two equi-potential connection points are available on both sides of the Terminal

These Terminal Block are specially built in circuit gives light indication in the event of a fuse blow out at the top level.

These blocks are ideal for use in applications requiring high density wiring.

These blocks are used measuring ,control and regulatory circuits. they provide a clear functional advantage for devices having utility instruments and associated transformers.in ckt4u/4 disconnection is achieved by lifting a lever which operates the knife contact. Specially designed socket headed screws act as test monitoring...

In DDDL4U Disconnection is achieved by a hinged lever. Specially designed socket headed screws act as test monitoring points in this Terminal

In DDDL4ULR Disconnection is achieved by a hinged lever. Specially designed socket headed screws act as test monitoring points in this Terminal

In CSDL4U Disconnection is achieved by a hinged lever. Specially designed socket headed screws act as test monitoring points in this Terminal

The CDS4U Disconnect & Test Terminal Block is used for measuring, control and regulatory circuits. They provide a clear functional advantage for devices having utility instruments and associated transformers. Separate testing points facilitate insertion of test probes. Disconnection is achieved by means of a slide...

Disconnect Test Terminal Block mainly used for metering circuit. Test Terminal Blocks can be used for testing a wide range of electrical equipment including integrating meters and protective relays, without disturbing the normal load circuit.These Terminal Blocks reduces the possibility of damage to the current...

These Terminal Blocks are used for Grounding / Earthing Wires. They are Green-Yellow colour coded as per industries standard. They have the same top profile as their respective feed through Terminal Blocks.

These blocks are used to connect multiple wires in single Terminal Block, thereby eliminating reliability problems encountered when connecting multiple wires in a single clamp.This can be used for the street lighting poles application.

These blocks are used to connect multiple wires in single Terminal Block, thereby eliminating reliability problems encountered when connecting multiple wires in a single clamp.This can be used for the street lighting poles application.

ODL4UCR Terminal Block , the top level is offset from the bottom level by half the thickness of the terminal block. this creates better access for the bottom level screw while the wires are connected. It is recommended to use End Plates at both ends...

The CDS4UCR4 sq.mm Corrosive Resistance Disconnect & Test Terminal Blocks is used for measuring, control and regulatory circuits. they provide a clear functional advantage for devices having utility instruments and associated transformers. Separate testing points facilitate insertion of test probes. Disconnection is achieved by means...

CTL2.5UHL Terminal Blocks are an ideal choice for control systems where sensor and actuator applications are involved. The simplified three level connections tremendously increase wiring density in the circuit. In application where switching indication is required CTL2.5UHL is the one with built in electronic component....

CTL2.5UH(I.S)D2 Internally shorted Terminal Blocks with built-in Diode for reserve polarity protection ideal choice for control systems where sensor and actuator applications are involved. The simplified three level connections with internally shorted helps in tremendously increase wiring density in the circuit. In application where switching...

CTL2.5UH Terminal Blocks are an ideal choice for control systems where sensor and actuator applications are involved. The simplified three level connections tremendously increase wiring density in the circuit. The top level of CTL2.5UH terminal block provides connection points for signal wires while the middle...

CTL2.5U Terminal Blocks are an ideal choice for control systems where sensor and actuator applications are involved. The simplified three level connections tremendously increase wiring density in the circuit. The top level of CTL2.5U terminal block provides connection points for signal wires while the middle...

CTL2.5U(I.S) Terminal Block is an internally shorted terminal block which can be used for distribution application ideal choice for control systems where sensor and actuator applications are involved. The simplified three level connections with internally shorted helps in tremendously increase wiring density in the circuit....

CTL2.5UL Terminal Blocks are an ideal choice for control systems where sensor and actuator applications are involved. The simplified three level connections tremendously increase wiring density in the circuit. In application where switching indication is required CTL2.5UL is the one with built in electronic component....

These blocks are ideal for use in applications requiring high density wiring.

These blocks are ideal for use in applications requiring high density wiring.

These blocks are ideal for use in applications requiring high density wiring.

ODL2.5(I.S) internally shorted Terminal Block , the top level is offset from the bottom level by half the thickness of the terminal block. this creates better access for the bottom level screw while the wires are connected. It is recommended to use End Plates at...

ODL2.5 Terminal Block , the top level is offset from the bottom level by half the thickness of the terminal block. this creates better access for the bottom level screw while the wires are connected. It is recommended to use End Plates at both ends...

These blocks are ideal for use in applications requiring high density wiring.

These Terminal Blocks are used for Grounding / Earthing Wires. They are Green-Yellow colour coded as per industries standard. They have the same profile as their respective feed through Terminal Blocks.

ODL2.5A Terminal Block , the top level is offset from the bottom level by half the thickness of the terminal block. this creates better access for the bottom level screw while the wires are connected. It is recommended to use End Plates at both ends...

ODL2.5A(I.S) internally shorted Terminal Block , the top level is offset from the bottom level by half the thickness of the terminal block. this creates better access for the bottom level screw while the wires are connected. It is recommended to use End Plates at...

DB16 , these are the distribution blocks are used for single phase distribution system. These blocks can either be mounted on Din rail or can be panel mounted.

These Terminal Blocks are used for Grounding / Earthing Wires. They are Green-Yellow colour coded as per industries standard. They have the same top profile as their respective feed through Terminal Blocks.

CMDB blocks are a modified version of the CDB terminal blocks without the central incoming terminal connection.

CMDB blocks are a modified version of the CDB terminal blocks without the central incoming terminal connection.

These Terminal Blocks are used for Grounding / Earthing Wires. They are Green-Yellow colour coded as per industries standard. They have the same top profile as their respective feed through Terminal Blocks.

These Terminal Blocks are used for Grounding / Earthing Wires. They are Green-Yellow colour coded as per industries standard. They have the same top profile as their respective feed through Terminal Blocks.

The screw or spring clamp is the heart of the terminal block. It is engineered for perfect grip over solid or stranded wires. The special spring steel clamp ensures a tight yet gentle grip over the wire. The polyamide 66 housing encloses the clamps and...

0.14-6 mm², Cu 24 terminal blocks WT 4 terminal blocks, by Wieland jumper bars for terminal blocks: make Wieland IVB WKF 4 terminal marking, neutral with elastic membranes, which can be removed for cable entry via cable glands, sealing range 9.0-21.0 mm with two cable...

0.14-6 mm², Cu 19 terminal blocks WT 4 terminal blocks, by Wieland jumper bars for terminal blocks: make Wieland IVB WKF 4 terminal marking, neutral with elastic membranes, which can be removed for cable entry via cable glands, sealing range 9.0-21.0 mm with two cable...

0.14-6 mm², Cu 14 terminal blocks WT 4 terminal blocks, by Wieland jumper bars for terminal blocks: make Wieland IVB WKF 4 terminal marking, neutral with elastic membranes, which can be removed for cable entry via cable glands, sealing range 9.0-21.0 mm with one cable...

0.14-6 mm², Cu 12 terminal blocks WT 4 terminal blocks, by Wieland jumper bars for terminal blocks: make Wieland IVB WKF 4 terminal marking, neutral with elastic membranes, which can be removed for cable entry via cable glands, sealing range 9.0-21.0 mm with one cable...