Connector

The PNOZ msi3Bp Adapter Si/Ha 15/15 2.5m is an adapter module for the PNOZ MSI modular safety relay system by Pilz. This module provides 15 inputs (Si) and 15 outputs (Ha), offering a flexible solution for integrating safety devices within industrial automation systems. With a...

The PNOZ MSI21P Adapter Bos/Rex 15/15 1.5m is a 1.5-meter adapter cable designed to connect Pilz's PNOZ MSI safety relay modules to Bosch Rexroth motion control systems with a 15/15 pin configuration. This adapter enables smooth integration and communication between the PNOZ MSI safety relays...

The PNOZ msi16p Adapter Baumuell 15/15 2.5m is an adapter module for the PNOZ MSI modular safety relay system by Pilz, specifically designed for integration with Baumueller automation components. It features 15 inputs (Si) and 15 outputs (Ha), enabling seamless connectivity between the PNOZ MSI...

Power cable; Cable assembled on both sides Connector <> con.23 round connector 8-pin SpeedTec; No. of wires and cross section (4x1.5+1x (2x1.0)) suitable for PMCprotego D.01-24 and the motors PMCtendo SZ.4x…K bis SZ.73…K; Length 5m.

Feedback cable for EnDat 2.2; Cable assembled on both sides Sub-D15 connector <> con.15 round connector 12-pin SpringTec; suitable for all PMC servo controllers (DD5, protego) and the motors PMCtendo SZ.3x; Length 10m.

Feedback cable for EnDat 2.2; Cable assembled on both sides Sub-D15 connector <> con.15 round connector 12-pin SpringTec; suitable for all PMC servo controllers (DD5, protego) and the motors PMCtendo SZ.3x; Length 5 m.

The PIT en1.0p-5m-s is a component in the PITreader system by PILZ. It is typically a cable or connection element designed to connect various devices within the system. The "5m" suggests it has a length of 5 meters, making it suitable for medium-range connections in...

The PDP67 Cable M12-5sm, 10m is a high-quality industrial cable designed for reliable and stable connectivity in automation and safety systems. Featuring a 5-pin M12 straight male (M12-5sm) connector, this 10-meter cable ensures efficient signal transmission over moderate distances. It is ideal for connecting sensors,...

The PDP67 Cable M12-5sf M12-5sm, 0.5m is a compact and high-quality industrial cable designed for secure and efficient connectivity in automation and safety systems. Featuring a 5-pin M12 straight female (M12-5sf) connector on one end and a 5-pin M12 straight male (M12-5sm) connector on the...

The MM A MINI-IO CAB99 1.5m is likely a communication or I/O (input/output) cable designed for connecting devices in industrial or automation applications. Here's a breakdown of the possible features: MM A: May indicate a particular model or series of the cable, possibly related to...

The MM A MINI-IO CAB17 5.0m by Pilz is a durable 5-meter I/O cable designed for seamless integration in industrial automation systems. It provides reliable and stable data transmission, ensuring efficient operation and secure connections with Pilz devices. This cable upholds Pilz’s commitment to safety,...

The MM A MINI-IO CAB17 1.5m by Pilz is a compact, high-quality I/O cable designed for industrial automation systems. With a length of 1.5 meters, it provides reliable signal transmission between devices such as sensors, controllers, and actuators. Ideal for tight spaces, this cable ensures...

The MM A MINI-IO CAB14 2.5m by Pilz is a compact, high-quality 2.5-meter I/O cable designed for seamless connection and communication in industrial automation systems. It ensures reliable data transmission, easy integration, and optimal performance in demanding environments, meeting Pilz’s high standards of safety and...

The MM A MINI-IO CAB08 2.5m by Pilz is a reliable 2.5-meter I/O cable designed for optimal performance in industrial automation systems. It ensures stable and secure data transmission, offering seamless integration with Pilz devices. Built for durability, it meets high standards of safety and...

The MM A MINI-IO CAB05 1.5m by Pilz is a high-quality 1.5-meter I/O cable designed for seamless integration in industrial automation systems. It offers reliable data transmission and secure connections, ensuring efficient operation and maintaining Pilz's commitment to safety, performance, and durability in challenging environments.

The MM A MINI-IO CAB01B 2.5m by Pilz is a high-performance 2.5-meter I/O cable designed for reliable and secure data transmission in industrial automation systems. It provides seamless integration with Pilz equipment, ensuring stable connections and efficient operation. Built for durability, this cable meets strict...

The Cable/PW/M12-5SMX/M12-5SFX/L/010/1Q50/BK is a 10-meter industrial cable with M12 5-pin male and female connectors. Designed for power and data transmission in automation and control systems, it ensures secure, reliable connectivity over long distances. Its durable black jacket makes it suitable for demanding environments.

The Cable/PW/M12-5SMX/M12-5SFX/L/003/1Q50/BK by Pilz is a durable, high-performance cable with M12 5-pin male and female connectors, designed for industrial automation applications. It provides secure and reliable data transmission, ensuring seamless connectivity and efficient operation in demanding environments, with a 3-meter length and black color.

The Cable/PN/M12-4SMX/M12-4SMX/D/005/Q324/GN is a 5-meter industrial cable designed for power and data transmission in automation systems. It features 4-pin M12 male connectors on both ends, ensuring secure and reliable connections. The cable is constructed with durable green PVC insulation, offering flexibility and resistance to abrasion....

The Cable/FC/XXX-XXXX/M12-5SFX/A/020/0Q34/BK is a 20-meter industrial cable designed for factory automation systems. It features a 5-pin M12 female (straight) connector with an A-coded configuration, ensuring secure and reliable power and data transmission. The cable is made with durable black PUR insulation, offering resistance to oil,...

The Cable/PW/M12-5SMX/M12-5SFX/L/005/1Q50/BK is a 5-meter industrial cable with 5-pin M12 connectors (male and female), designed for secure data and power transmission in automation systems. The cable features high-quality materials, including CuZn nickel-plated threaded rings, gold-plated contact surfaces, and FKM seals for durability. Its black PUR...

Feedback cable for EnDat 2.2; Cable assembled on both sides Sub-D15 connector <> con.23 round connector 12-pin SpeedTec; suitable for all PMC servo controllers (DD5, protego) and the motors PMCtendo SZ4x to SZ8x; Length: 15 m.

These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations.The wire is crimped to ring /fork type Lug (Ferrule) and is screwed on to flat current bar on the Terminal Block. The fastening nut always remains captive in the hinged...

These blocks are ideal for use in applications requiring high density wiring . Interconnection / shorting is possible at both levels. CDL4UN is the newer version of the CDL4U Terminal Block. It is suited for 800 V application and can accommodate larger K6 marking tags.

These blocks are ideal for use in application requiring high density wiring. Interconnection shorting is possible at both levels. The CDLG2.5 is a double level terminal block with as additional connection point for earthing (Grounding) cables. This separate connection point is appropriately identified by the...

The CTLG2.5 is a triple level Terminal Blockwith an additional connection for earthing cables.This separate connection point is appropriatelyidentified by the green - yellow imprint on its top.This Terminal Block is an ideal choice formotor, sensor, actuator and initiator connections.

These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations.The wire is crimped to ring /fork type Lug (Ferrule) and is screwed on to flat current bar on the Terminal Block. The fastening nut always remains captive in the hinged...

ODL4U Terminal Block , the top level is offset from the bottom level by half the thickness of the terminal block. this creates better access for the bottom level screw while the wires are connected. It is recommended to use End Plates at both ends...

These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations. The wire is crimped to ring /fork type Lug (Ferrule) and is screwed on to flat current bar on the Terminal Block. The range includes Terminal Blocks for wire sizes...

The CDB range of distribution blocks is an ideal choice for a simplified distribution system. A bolt in the center of the block provides a connection point for the incoming cable. All the terminals are internally connected and provide multiple connection points for the outgoing...

  The CDB range of distribution blocks is an ideal choice for a simplified distribution system. A bolt in the center of the block provides a connection point for the incoming cable. All the terminals are internally connected and provide multiple connection points for the...

The CDB range of distribution blocks is an ideal choice for a simplified distribution system. A bolt in the center of the block provides a connection point for the incoming cable. All the terminals are internally connected and provide multiple connection points for the outgoing...

The CDB range of distribution blocks is an ideal choice for a simplified distribution system. A bolt in the center of the block provides a connection point for the incoming cable. All the terminals are internally connected and provide multiple connection points for the outgoing...

The CDB range of distribution blocks is an ideal choice for a simplified distribution system. A bolt in the center of the block provides a connection point for the incoming cable. All the terminals are internally connected and provide multiple connection points for the outgoing...

Modular Distribution Blocks with 35 sq.mm Input connections and 10 sq.mm output Connection

These blocks are used for terminating Grounding/Earthing wires. They are green-yellow coded as per industry standards. CGMT4 is suitable for DIN 15 micro rail & can be used in conjunction with CMT4 Terminal Blocks.

This Terminal Block is preferred for applications where the connections are subjected to severe vibrations. The wire is crimped to a ring / fork type lug (ferrule) and is screwed on to the flat current bar on the Terminal Block. cross connection can be achieved...

This Terminal Block is preferred for applications where the connections are subjected to severe vibrations. The wire is crimped to a ring / fork type lug (ferrule) and is screwed on to the flat current bar on the Terminal Block. cross connection can be achieved...

This Terminal Block is preferred for applications where the connections are subjected to severe vibrations. The wire is crimped to a ring / fork type lug (ferrule) and is screwed on to the flat current bar on the Terminal Block. cross connection can be achieved...

This Terminal Block is preferred for applications where the connections are subjected to severe vibrations. The wire is crimped to a ring / fork type lug (ferrule) and is screwed on to the flat current bar on the Terminal Block. cross connection can be achieved...

This Terminal Block is preferred for applications where the connections are subjected to severe vibrations. The wire is crimped to a ring / fork type lug (ferrule) and is screwed on to the flat current bar on the Terminal Block. cross connection can be achieved...

This Terminal Block is preferred for applications where the connections are subjected to severe vibrations. The wire is crimped to a ring / fork type lug (ferrule) and is screwed on to the flat current bar on the Terminal Block. cross connection can be achieved...

This Terminal Block is preferred for applications where the connections are subjected to severe vibrations. The wire is crimped to a ring / fork type lug (ferrule) and is screwed on to the flat current bar on the Terminal Block. cross connection can be achieved...

This Terminal Block is preferred for applications where the connections are subjected to severe vibrations. The wire is crimped to a ring / fork type lug (ferrule) and is screwed on to the flat current bar on the Terminal Block. cross connection can be achieved...

This Terminal Block is preferred for applications where the connections are subjected to severe vibrations. The wire is crimped to a ring / fork type lug (ferrule) and is screwed on to the flat current bar on the Terminal Block. cross connection can be achieved...

These Terminal Blocks are used in electrical and control systems which require fuse protection. This Terminal Blocks accepts industry standard 6.3 X 32 mm glass cartridge fuses.

These blocks are used for measuring, control, regulatory circuits and for current transformer connection application. They provide a clear functional advantage for devices having utility instruments and associated transformers. Circuit disconnection is achieved by opening the central slide link. The barrel nuts provide test sockets...

These Terminal Blocks are used for measuring, control and regulatory circuits. They Provide a clear functional advantage for devices having utility instruments and associated transformers. in this Terminal Block disconnection is achieved by means of a slide link operated by screwdriver. Specially designed socket headed...