Products

The PSSu E S ABS SSI by Pilz is an advanced safety module designed for industrial automation systems, featuring an ABS (Absolute) position sensor interface with SSI (Synchronous Serial Interface) communication. This module is ideal for applications that require precise position feedback from absolute encoders...

PSSu, electronic module, failsafe, counter, 1 input, absolute encoder SSI encoder, differential signal RS422, resolution 32 Bit, 7 transmission rates, 62.6 - 1500 kHz, for increased environmentalrequirements.

The PSSu E S PD-D by Pilz is a protection device module designed for industrial automation systems, focusing on providing safe and reliable protection against faults or hazardous conditions. This module is part of the PSSu series, designed to integrate easily into safety-critical environments. The...

PSSu, electronic module, standard, serial interface, RS232, 1 input, 2 communication channels, 64 Bit, full duplex mode, 7 transmission rates, configurable, 0.6 - 19.2 kBit/s, hardware handshake CTS/RTS, potential isolation, cable length 15 m, for increased environmental requirements.

The PSSu H FS2 SN SD is a modular, high-performance safety and control unit from Pilz, part of the PSS 4000 series, designed for industrial automation applications where both standard and safety control functions are needed.

The PSSu K S 16DI by Pilz is a robust digital input module designed for industrial automation applications. It features 16 digital inputs (16DI) for monitoring various sensors, switches, and other input devices. This module is ideal for systems that require high input density and...

The PSSu XB F -T by Pilz likely refers to a specific safety relay or expansion module within Pilz's automation and safety product lineup. The XB designation may indicate a particular series or type of module, while F could signify a function, such as fault...

The PSSu XR F -T by Pilz is likely a specific model or component used in industrial automation systems. The XR designation could indicate a type of safety relay or expansion module, while the F may suggest a function related to fault monitoring or safety...

Safety relay (standalone), inputs: 1/2-channel wiring, outputs: 2 N/O, 1 N/C, 2 SC, UB 24 - 240 V AC/DC, UM = 0.12 - 3 V AC/DC, UMmax = 690 V, width: 45 mm, standstill monitor. The device monitors the EMC voltage created when motors run...

Safety relay (standalone), inputs: Measuring inputs 1/3-phase motors, outputs: 2 N/O, 1 N/C, 2 SC, UB = 24 - 240 V AC/DC, UMmax = 690V, switching threshold 20 - 500 mV, width 45 mm, plug-in spring-loadedterminals, standstill monitor, EMC voltage created during motor rundown.

Safety relay (standalone), inputs: 1-channel wiring, outputs: 1 N/O, 2 N/C, UB = 24 V DC, width: 45 mm, screw terminals integrated, delay-on energisation timer relay, monitoring feedback loop, energisation times 12 levels from 0.3 - 3 s.

Contact expansion, inputs: 1/2-channel wiring with/without detection of shorts across contacts, outputs: 8 N/O, 1 N/C, UB 24 VAC/DC, width: 90 mm plug-in screw terminals, contact block for contact expansion in connection with safety-related control components.

Contact expansion, inputs: 1-channel wiring, outputs: 4 N/O, UB 24 V DC, width: 25 mm, screw terminals integrated, contact block for contact expansion in connection with safety-related control components.

Contact expansion, inputs: 1-channel wiring, outputs: 4 N/O, UB 24 V DC, width 22.5 mm, plug-in spring-loaded terminals, contact block for contact expansion in connection with safety-related control components.

Contact expansion, inputs: 1-channel wiring, outputs: 4 N/O t-d,(t = 0.5 s fix), UB = 24 V DC, width: 22.5 mm plug-in terminals of screw type, contact block for contact expansion in connection with safety-related control components.

Contact expansion, inputs: 1-channel wiring, outputs: 4 N/O t-d (t = 2 s fixed), UB = 24 V DC, width: 22.5 mm plug-in terminals of screw type, contact block for contact expansion in connection with safety-related control components.

The RevPi Con CAN can be used to equip the RevPi Connect with CAN bus . On the top, the module has a 4-pin connector to the CAN bus connection, Baud rate: up to 1 MBit/s, housing dimensions (H x W x D): 96 x...

The S1IM 230-240VAC is a current monitoring device designed to measure electrical current from 0.01A to 15A. Operating at 230-240VAC, it provides precise and reliable current measurement for a variety of industrial applications. This device helps ensure accurate monitoring of electrical systems, improving efficiency, safety,...

The S1UM 110-130VAC is a versatile voltage measurement device designed to measure voltage levels ranging from 0.1 to 500VAC/DC. Operating within the 110-130VAC range, it provides accurate and reliable voltage measurements for both AC and DC circuits. This device is ideal for industrial applications that...

The S1UM 24VAC/DC is a versatile measurement device designed to handle a wide range of voltage inputs from 0.1 to 500VAC/DC. Operating at 24VAC/DC, it provides accurate monitoring and measurement of AC and DC voltage levels in industrial systems. Its robust design ensures reliable performance...