Pilz

The PSSu E S 4DI by Pilz is a digital input module with 4 channels (4DI) designed for industrial automation systems. This module is used to receive digital signals from various devices such as sensors, switches, or control systems. It is ideal for applications where...

The PSSu E S 4DI-D by Pilz is a digital input module designed for use in industrial automation systems. It features four digital input channels (4DI), providing reliable signal processing for devices such as switches, sensors, or other binary devices. The "-D" designation indicates it...

The PSSu E S 4DI-T by Pilz is a digital input module designed for industrial automation systems, offering 4 digital inputs (DI) with high-speed processing capabilities, as indicated by the T. This module is ideal for applications requiring rapid response to input signals, such as...

The PSSu E S 4DO 0.5-D by Pilz is a digital output module featuring 4 channels (4DO) with a 0.5-ampere current capacity per channel, ideal for controlling multiple digital devices within industrial automation systems. The 0.5-D specification signifies dual-channel safety and supports efficient, reliable switching...

PSSu, electronic module, standard, digital inputs and outputs, 4outputs, 0.5 A, single-pole, positive-switching, short circuit-proof,overload-proof, expanded diagnostic data, for increased environmental requirements.

The PSSu E S INC by Pilz is an incremental encoder interface module, designed for industrial automation applications where precise motion control and position tracking are essential. The module is intended for integration with the PSSu control system, providing reliable and accurate incremental encoder signal...

PSSu, electronic module, standard, counter, 2 operating modes, configurable, 1 input, incremental encoder, differential signal RS422, resolution 32 Bit, 1 output encoder supply 24 V DC 100 mA, 1 output, 0.5 A, for increased environmental requirements.

PSSu, electronic module, standard, serial interface, RS232, 1 input, 2 communication channels, 64 Bit, full duplex mode, 7 transmission rates, configurable, 0.6 - 19.2 kBit/s, hardware handshake CTS/RTS, potential isolation, cable length 15 m.

PSSu, electronic module, standard, serial interface, RS485/422, 1 input, 2 communication channels, 64 Bit, full duplex and half duplexmode, 7 transmission rates, configurable, 0.6 - 19.2 kBit/s, potentialisolation, cable length 1,000 m.

The PSSu E S RS485-T by Pilz is an RS485 communication module designed for use in industrial automation systems. It enables reliable and high-speed data transmission between devices over long distances, using the RS485 protocol. The "-T" suffix indicates that this module is temperature-rated for...

The PSSu H FS SN SD M12-R is a modular safety and control unit from Pilz, part of the PSS 4000 series, designed to provide robust and secure control for industrial automation systems with a focus on safety. FS stands for Functional Safety, indicating that...

The PSSu H FS SN SD-R is a modular, high-performance safety and control unit from Pilz, part of the PSS 4000 series. This unit combines safety functionality with standard control capabilities for use in industrial automation systems. FS stands for Functional Safety, meaning it is...

The PSSu H FS2 SN SD-T is a modular safety and control unit from Pilz, designed to handle both standard and safety functions in industrial automation applications. It is part of the PSS 4000 series, which offers flexible and scalable solutions for complex systems that...

PSSu, head module, control system PSSu PLC, failsafe and standard, PL e, SIL CL 3, 2 M12 female connector 4-pin D-coded, SafetyNET p RTFN, Modbus/TCP, Raw UDP, Raw TCP, EtherNet/IP adapter, PROFINET IO DEVICE, SD card, M12 female connector, for railway applications.

PSSu, head module, control system PSSu PLC, failsafe and standard, PL e, SIL CL 3, 2 RJ45 ports, SafetyNET p RTFN, Modbus/TCP, Raw UDP, Raw TCP, EtherNet/IP adapter, PROFINET IO DEVICE, SD card, for railwayapplications.

PSSu, head module with increased performance, control system PSSu PLC, failsafe and standard, PL e, SIL CL 3, 2 RJ45 ports, SafetyNET p RTFN, Modbus/TCP, Raw UDP, Raw TCP, EtherNet/IP adapter, PROFINET IO DEVICE, SD card not included.

PSSu, head module with increased performance, control system PSSu PLC, failsafe and standard, PL e, SIL CL 3, 2 RJ45 ports, SafetyNET p RTFN, Modbus/TCP, Raw UDP, Raw TCP, EtherNet/IP adapter, PROFINET IO DEVICE, no SD card included, for increased environmental requirements.

PSSu, compact module, failsafe, counter, safe motion monitoring,2 outputs, failsafe, 0.5 A, single-pole, positive-switching, shortcircuit-proof, overload-proof, free from feedback, 1 output, standard, 0.5 A,single-pole, positive-switching, short circuit-proof, 1 combined input and output CIO for cascading, standard, 1 input for encoder, Mini-IO female connector, 8-pin, 2...

PSSu, compact module, failsafe, counter, safe motion monitoring, recording position counter value, 2 outputs, failsafe, 0.5 A,single-pole, positive-switching, short-circuit proof overload-proof, free fromfeedback, 1 output, standard, 0.5 A, single-pole, positive-switching, short-circuitproof, 1 combined input and output CIO for cascading, standard, 1 input for encoder, Mini-IO...

PSSu, compact module, failsafe, counter, safe motion monitoring, recording position counter value, 2 outputs, failsafe, 0.5 A,single-pole, positive-switching, short circuit-proof overload-proof, free fromfeedback, 1 output, standard, 0.5 A, single-pole, positive-switching, shortcircuit-proof, 1 combined input and output CIO for cascading, standard, 1 input for encoder, Mini-IO...

PSSu, compact module, failsafe, special module, analysis unit forPSENvip, basic version, 1 interface PSENvip receiver, 1 interface PSENvip transmitter, 4 inputs, 2 test pulse outputs 0.25 A, 2 outputs, 1.75 A, single-pole, plus-switching, short circuit-proof, overload-proof, free from feedback, 2 outputs, 3 A, dual-pole, short...

PSSu, compact module, failsafe, special module, analysis unit forPSENvip, productive version, 1 interface PSENvip receiver, 1 interface PSENvip transmitter, 4 inputs, 2 test pulse outputs 0.25 A, 2 outputs, 1,75 A, single-pole, plus-switching, short-circuit proof, overload-proof, free from feedback, 2 outputs, 3 A, dual-pole, short-circuit...

PSSu, compact module, failsafe, digital inputs and outputs, 2 operating modes, configurable, pulse stretching, rapid shutdown, 12 inputs, 2 test pulse outputs 0.25 A, 2 outputs, 2 A, single-pole, positive-switching, short-circuit proof, overload-protected, free fromfeedback, 2 outputs, 3 A, dual-pole, positive-switching, short-circuit proof, overload-protected, free...

The PSSu K F INC by Pilz is an incremental input module designed for use in industrial automation systems. It provides reliable processing of signals from incremental encoders, allowing for precise monitoring of position and speed. The module integrates smoothly into the PSSu control system...

The PSSu K S 8DI 8DO 0.5 by Pilz is a versatile I/O module designed for industrial automation systems, providing 8 digital inputs (8DI) and 8 digital outputs (8DO) with 0.5A current handling capability. This module allows for efficient control and monitoring of various digital...

PSSu, compact module, standard, serial interface, RS232, 1 input, 2 communication channels, 64 Bit, full duplex mode, 7 transmissionrates, configurable, 0.6 - 19.2 kBit/s, hardware handshake CTS/RTS, potential isolation, cable length 15 m.

Safety relay (standalone), inputs: 2-channel wiring with detection of shorts across contacts, outputs: 6 N/O, 4 N/C, UB = 24V DC, width: 90 mm, screw terminals integrated, safety gate monitor, simultaneity monitoring approx. 4 s, feedback loop.

Safety relay (standalone), inputs: 1/2-channel wiring, outputs: 2 N/O, 1 N/C, 2 SC, UB 24 - 240 V AC/DC, UM = 0.0075 - 0.5 V AC/DC, UMmax = 690 V, width: 45 mm, standstill monitor. The device monitors the EMC voltage created during motor rundown....

Safety relay (standalone), inputs: 1/2-channel wiring, outputs: 2 N/O, 1 N/C, 2 SC, UB 24 - 240 V AC/DC, UM = 0.02 - 0.5 VAC/DC, UMmax = 690 V, width: 45 mm, standstill monitor. The device monitors the EMC voltage created when motors run down.

Safety relay (standalone), inputs: 1/2-channel wiring, outputs: 2 N/O, 1 N/C, 2 SC, UB 24 - 240 V AC/DC, UM = 0.02 - 0.5 VAC/DC, UMmax = 690 V, width: 45 mm, standstill monitor, coated version. The device monitors the EMC voltage created during motor...

Safety relay (standalone), inputs: Measuring inputs 1/3-phase motors, outputs: 2 N/O, 1 N/C, 2 SC, UB = 24 - 240 V AC/DC, UMmax = 690V, switching threshold 7.5 - 500 mV, width: 45 mm, plug-in spring-loadedterminals, standstill monitor, the device monitors the EMC voltage created...

Safety relay (standalone), inputs: Measuring inputs 1/3-phase motors, outputs: 2 N/O, 1 N/C, 2 SC, UB = 24 - 240 V AC/DC, UMmax = 690V, switching threshold 120 - 3000 mV, width: 45 mm, plug-in spring-loaded terminals, standstill monitoring, the device monitors theEMC voltage created...

Safety relay (standalone), inputs: 1-channel wiring, outputs: 1 N/O, 2 N/C, UB = 230 V AC, width: 45 mm, screw terminals integrated, delay-on energisation timer relay, monitoring feedback loop, energisation times 12 levels from 3 - 30 s.

Safety relay (standalone), inputs: 1-channel wiring, outputs: 1 N/O, 2 N/C, UB = 24 V DC, width: 45 mm, screw terminals integrated, delay-on energisation timer relay, monitoring feedback loop, energisation times 12 levels from 3 - 30 s.

Safety relay (standalone), inputs: 1-channel wiring, outputs: 1 N/O, 2 N/C, UB = 230 V AC, width: 45 mm, screw terminals integrated, delay-on energisation timer relay, monitoring feedback loop, energisation times 12 levels from 30 - 300 s.

Safety relay (standalone), inputs: 1-channel wiring, outputs: 1 N/O, 2 N/C, UB = 24 V DC, width: 45 mm, screw terminals integrated, delay-on energisation timer relay, monitoring feedback loop, energisation times 12 levels from 30 - 300 s.

Safety relay (standalone), inputs: 1-channel wiring, outputs: 1 N/O, 2 N/C, UB = 24 V DC, width: 45 mm, screw terminals integrated, delay-on energisation timer relay, monitoring feedback loop, energisation times 12 levels from 60 - 600 s.

Contact expansion, inputs: 1/2-channel wiring with/without detection of shorts across contacts, outputs: 8 N/O, 1 N/C, UB = 110 -120 V AC, width: 90 mm, contact block to increase the number of contacts in connection with safety-related control components.

Contact expansion, inputs: 1/2-channel wiring with/without detection of shorts across contacts, outputs: 8 N/O, 1 N/C, UB = 230 -240 V AC, width: 90 mm, contact block for contact expansion in connection with safety-related control components.

Contact expansion, inputs: 1/2-channel wiring with/without detection of shorts across contacts, outputs: 8 N/O, 1 N/C, UB 24 V DC,width: 90 mm, contact block for contact expansion in connection with safety-related control components.

Contact expansion, inputs: 1/2-channel wiring with/without detection of shorts across contacts, outputs: 8 N/O, 1 N/C, UB = 240 VAC/DC, width: 90 mm, plug-in terminals of screw type, contact block for contact expansion in connection with safety-related control components.

Contact expansion, inputs: 1/2-channel wiring with/without detection of shorts across contacts, outputs: 8 N/O, 1 N/C, UB = 24 VAC/DC, width: 90 mm, plug-in spring-loaded terminals, contact block for contact expansionin connection with safety-related control components.

Contact expansion, inputs: 1/2-channel wiring without detection of shorts across contacts, outputs: 4 N/O, UB = 24 - 240 VAC/DC, width: 45 mm, plug-in terminals of screw type, contact block for contact expansion in connection with safety-related control components.

Contact expansion, inputs: 1/2-channel wiring without detection of shorts across contacts, outputs: 4 N/O, UB 24 V DC, width:22.5 mm plug-in screw terminals, contact block for contact expansion in connection with safety-related control components.

Contact expansion, inputs: 1-channel wiring, outputs: 4 N/O, UB 24 V DC, width: 25 mm, plug-in screw terminals, contact block for contact expansion in connection with safety-related control components.

Contact expansion, inputs: 1-channel wiring, outputs: 4 N/O t-d, UB = 24 V DC, width: 22.5 mm, screw terminals integrated, delay-on de-energisation contact block for contact expansion inconnection with safety-related control components, delay time permanently set 0.5 s.

Contact expansion, inputs: 1-channel wiring, outputs: 4 N/O t-d, UB = 24 V DC, width: 22.5 mm, screw terminals integrated, delay-onde-energisation contact block for contact expansion in connection with safety-related control components, release time 0.75 sfixed.

Contact expansion, inputs: 1-channel wiring, outputs: 4 N/O t-d, UB = 24 V DC, width: 22.5 mm, screw terminals integrated, delay-on de-energisation contact block for contact expansion inconnection with safety-related control components, delay time permanently set 1 s.